Is that all?

Monday, 15 November 2010

Uh Oh!

Leak is getting worse, I stripped down to oil cooler whilst engine in.

. remove air filter and pipes
. remove carby
. remove foil air pipes
. remove hinges and boot lid
. remove thermostat
. remove throttle cable and pipe
. remove fan belt
. remove generator cables AFTER DISCONNECTING BATT
. remove coil cables
. remove fan housing
. reach in under the breast plate tinware and undo the 8mm bolts with open ended spanner - don't drop them!
. remove oil cooler

I changed seals. I had over tightened them. 5lbs torque is the setting!

I replaced them and re-assembled.

As you can see from pics, they were crushed originally!


Still a leak just not as bad.

No comments:

Post a Comment